Resources - Technical Specifications

Lens Options

All acrylics have a minimum thickness of 1/8 inch. UV stable virgin white acrylic is standard.

Ballasts

Fluorescent fixtures are supplied with high power factor (HPF) ballasts that are Class A sound rated and Class P thermally protected. Ballasts operate at 120V or 277V input voltage. Minimum start temperature is 0 degrees Celsius. All ballasts are internal to fixtures.

Mounting

All fixtures are designed for permanent mounting to a recessed 4-inch octagonal outlet box. Any fixture weighing more than 50 pounds must have means for structural support independent of the outlet box; failure to do so will void Camman Industries' liability.

UL

Camman fixtures are UL listed, wired complete and short tested prior to packaging. All fixtures are shipped less lamps.

Warranty

Camman Industries maintains the highest level of quality and warrants its products against defects in material and workmanship under normal operating conditions within two years of shipment. Camman's warranty covers only equipment and components manufactured by Camman Industries, Inc. and does not include transportation, labor or installation charges. Camman reserves the right to decide between replacement or repair.

Click here for lamp options and additional technical information